Sold by the CONTINUOUSYARD!D-Shaped Style EPDM Sponge Rubber Seal, with a height of .312″ and a width of .468″Tape: HT – General Acrylic PSA /This acrylic based adhesive isbest used to hold the rubberseal in place while installedin a static application orcompressed between twostationary objectsMay beused in some light dutydynamic applications against avariety of substrates. Good heatperformance -20F to +158F.Please Note: During application ambient temperaturemust be above 60 F.Recommended temperature range forgeneral applications:-20F. through +150F, Sponge Rubber (EPDM)Application:For optimum performance -25% – 50% maximum compressionrecommendedResistance Ratings: Excellent resistance to water absorption, ozone, sunlight aging, low temperature, and compression setFlammability and CodeCompliance:FMVSS 302,UL 50CLEANING AND APPLICATION INSTRUCTIONSRegardless of bonding surface, it must be clean and free of surfacecontaminant such as oil, grease, mold release and dirtMost bonding failures are due to improperly cleaned surfaces.Prior to applying any adhesive, Clean surface with 50/50 denaturedalcohol and water solution